# Commission Delegated Regulation (EU) 2015/2446 of 28 July 2015 supplementing Regulation (EU) No 952/2013 of the European Parliament and of the Council as regards detailed rules concerning certain provisions of the Union Customs Code, Division Chapter residual rule: Where the country of origin cannot be determined by application of the primary rules, the country of origin of the goods shall be the country in which the major portion of the materials originated, as determined on the basis of the value of the materials. HS 2017 Code Description of goods Primary rules 7201 Pig iron and spiegeleisen in pigs, blocks or other primary forms. CTH 7202 Ferro-alloys. CTH 7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms. CTH 7204 Ferrous waste and scrap; re-melting scrap ingots of iron or steel. As specified for split headings ex 7204 (a) - Ferrous waste and scrap The origin of the goods of this split heading shall be the country where they were derived from manufacturing or processing operations or from consumption ex 7204 (b) - Re-melting scrap ingots of iron or steel The origin of the goods of this split heading shall be the country where the waste and scrap used to obtain them were derived from manufacturing or processing operations or from consumption 7205 Granules and powders, of pig iron, spiegeleisen, iron or steel. As specified for subheadings 7205 10 - Granules CTH - Powders: 7205 21 - - Of alloy steel As specified for split subheadings ex 7205 21 (a) - - - Mixed powders of alloy steel CTSH or CTSHS provided recasting or atomizing of the cast alloy ex 7205 21 (b) - - - Unmixed powders of alloy steel CTSH 7205 29 - - Other As specified for split subheadings ex 7205 29 (a) - - - Other mixed powders CTSH or CTSHS provided recasting or atomizing of the cast alloy ex 7205 29 (b) - - - Other unmixed powders CTSH 7206 Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203). CTH 7207 Semi-finished products of iron or non-alloy steel. CTH, except from heading 7206 7208 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. CTH 7209 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. CTH 7210 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. As specified for split headings ex 7210 (a) - Clad CTHS ex 7210 (b) - Plated or coated with tin, and printed or lacquered CTH ex 7210 (c) - Plated or coated with zinc, and corrugated CTH ex 7210 (d) - Other CTH 7211 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. As specified for split headings ex 7211 (a) - Hot-rolled CTH, except from heading 7208 ex 7211 (b) - Cold-rolled (cold-reduced) CTHS, except from heading 7209 7212 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. As specified for split headings ex 7212 (a) - Clad CTHS, except from heading 7210 ex 7212 (b) - Other CTH, except from heading 7210 7213 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. CTH, except from heading 7214 7214 Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. CTH, except from heading 7213 7215 Other bars and rods of iron or non-alloy steel. CTH 7216 Angles, shapes and sections of iron or non-alloy steel. As specified for split headings ex 7216 (a) - Not further worked than hot-rolled CTH, except from heading 7208, 7209, 7210, 7211 or 7212, and except from heading 7213, 7214 or 7215 when this change results from cutting or bending. ex 7216 (b) - Not further worked than cold-rolled CTH, except from heading 7209 or split heading ex 7211 (b), and except from heading 7215 when this change results from cutting or bending. ex 7216 (c) - Clad CTHS ex 7216 (d) - Other CTH, except from headings 7208 to 7215 7217 Wire of iron or non-alloy steel. CTH, except from headings 7213 to 7215; or change from headings 7213 to 7215, provided the material has been cold-formed. 7218 Stainless steel in ingots or other primary forms; semi-finished products of stainless steel. CTH 7219 Flat-rolled products of stainless steel, of a width of 600 mm or more. As specified for split headings ex 7219 (a) - Not further worked than hot-rolled CTH ex 7219 (b) - Not further worked than cold-rolled CTHS ex 7219 (c) - Clad CTHS ex 7219 (d) - Other CTHS 7220 Flat-rolled products of stainless steel, of a width of less than 600 mm. As specified for split headings ex 7220 (a) - Not further worked than hot-rolled CTH, except from 7219 ex 7220 (b) - Not further worked than cold rolled CTHS ex 7220 (c) - Clad CTHS ex 7220 (d) - Other CTHS 7221 Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel. CTH, except from heading 7222 7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. As specified for split headings ex 7222 (a) - Bars and rods, not further worked than hot-rolled CTH, except from heading 7221 ex 7222 (b) - Angles, shapes and sections, not further worked than hot-rolled CTH, except from heading 7219 or 7220 and except from heading 7221 or split heading ex 7222 (a) when this change results from cutting or bending. ex 7222 (c) - Bars and rods, angles, shapes and sections, not further worked than cold-rolled CTH, except from split heading ex 7219 (b) or ex 7220 (b); or CTHS from split heading ex 7222 (a) ex 7222 (d) - Bars and rods, angles, shapes and sections, clad CTHS ex 7222 (e) - Other bars and rods CTH, except from heading 7221 ex 7222 (f) - Other angles, shape and sections CTHS 7223 Wire of stainless steel. CTH, except from 7221 to 7222; or change from headings 7221 to 7222, provided the material has been cold-formed. 7224 Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel. CTH 7225 Flat-rolled products of other alloy steel, of a width of 600 mm or more. As specified for split headings ex 7225 (a) - Not further worked than hot-rolled CTH ex 7225 (b) - Not further worked than cold-rolled CTHS ex 7225 (c) - Clad CTHS ex 7225 (d) - Other CTH 7226 Flat-rolled products of other alloy steel, of a width of less than 600 mm. As specified for split headings ex 7226 (a) - Not further worked than hot-rolled CTH, except from heading 7225 ex 7226 (b) - Not further worked than cold-rolled CTHS, except from cold-rolled products of heading 7225 ex 7226 (c) - Clad CTHS ex 7226 (d) - Other CTHS, except from the same subheading 7227 Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. CTH, except from heading 7228 7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. As specified for split headings ex 7228 (a) - Bars and rods, not further worked than hot-rolled CTH, except from heading 7227 ex 7228 (b) - Angles, shapes and sections, not further worked than hot-rolled CTH, except from heading 7225 or 7226, and except from heading 7227 or split heading ex 7228 (a) when this change results from cutting or bending. ex 7228 (c) - Bars and rods, angles, shapes and sections not further worked than cold-rolled CTH, except from split heading ex 7225 (b) or ex 7226 (b) or CTHS from split heading ex 7228 (a) ex 7228 (d) - Bars and rods, angles, shapes and sections, clad CTHS ex 7228 (e) - Other bars and rods CTHS ex 7228 (f) - Other angles, shapes and sections CTHS 7229 Wire of other alloy steel. CTH, except from headings 7227 to 7228; or change from headings 7227 to 7228, provided the material has been cold-formed. --- Source: https://www.legislation.gov.uk/eur/2015/2446/attachment/10/division/division/SECTION XV/division/CHAPTER 72/division/Chapter residual rule: (the official version) Page: https://openlegislation.uk/eu-regulation-2015-2446/attachment-10/division/division-SECTION XV/division-CHAPTER 72/division-Chapter residual rule: Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.